Spearo Warning Sticker | Spearfishing Diver Safety Decal

Make your presence around the water easier to recognise with the Spearo Warning Sticker. Designed for spearfishers and divers, this high-visibility safety signal helps identify active diving and spearfishing gear on boats, kayaks, vehicles and equipment.

Built for demanding Australian conditions, the sticker combines durable 7-year outdoor vinyl with saltwater and freshwater resistance. It is a practical addition to dive setups that face sun, spray and repeated outdoor use.

A Clear Safety Signal for Spearfishers

High-visibility warning design

The bold format is made to stand out on equipment and smooth surfaces, helping other water users recognise spearfishing or diving activity around your setup.

Made for marine environments

Use it on boats, kayaks, dive-gear cases, coolers and safety equipment exposed to coastal conditions. The strong marine-grade adhesive supports dependable placement on properly prepared surfaces.

Specifications

• Size: 200 × 50 mm (approximately 8 × 2 inches)
• Material: Premium 7-year outdoor vinyl
• UV-resistant, waterproof and weatherproof
• Saltwater and freshwater resistant
• Strong marine-grade adhesive
• High-visibility diver warning design
• Suitable for clean, smooth surfaces

Where to Use Your Spearo Warning Sticker

Boats and watercraft

• Boats and watercraft
• Kayaks
• Dive flags and safety equipment
• Coolers and storage boxes

Dive gear and transport

• Dive tanks and smooth equipment surfaces
• Spearfishing gear cases
• Cars and smooth vehicle surfaces
• Toolboxes and equipment storage

Why 7-Year Outdoor Vinyl?

• Designed for dependable outdoor use
• Waterproof and weather-resistant
• Resists fading in harsh Australian sunlight
• Suitable for saltwater and freshwater environments
• Flexible enough for gently curved surfaces
• Long-lasting performance on boats, gear and vehicles

Why Choose Stick-Dat?

Made in Brisbane, Australia using professional printing equipment and premium 7-year outdoor vinyl. Each sticker is produced for strong visibility, reliable adhesion and lasting performance in harsh coastal conditions.

How to Apply

Prepare the surface

1. Clean the surface thoroughly with warm soapy water and allow to dry.
2. Position the sticker and check the alignment before removing the backing.
3. Mark the preferred placement if needed.

Apply the sticker

1. Peel back a small section of the backing.
2. Apply slowly, smoothing from the centre outward to reduce air bubbles.
3. Press firmly across the full sticker, especially around the edges.